Азотная сушилка SND

Дополнительная информация:

360° Изображение

Drying Hopper

The drying hopper adopts stainless steel 304 to avoid material contamination. It is suitable for producing optical-grade and food-grade products; The drying hopper detachable design make it easy for disassembly and cleaning

Описание Схемы

Характеристики

Модель		SND-10
Drying blower	KW	0.05
Drying heater	KW	0.6
Drying hopper capacity	L	8~16/1.76~3.52gal
Drying temp.	°C	140/284°F
Material storage tank capacity	L	50/11gal
Max.Air Consumption	m3/h	15
W2xD2xH2	mm	915x590x1315/360"x232''x518"
WxDxH	mm	370x310x1310/146"x122"x516"
A	mm	38/1.5"
B	mm	25/1.0 "
CxC	mm	70x70/27.9"x27.6"
DxD	mm	150x150/59“x59"
Цена
		Заказать

■ Features

• Standard PLC control, P.I.D temperature control.

• Adopt nitrogen drying technology to prevent materials from oxidation and turning yellowish during the drying process.

• All materials contacted surfaces are stainless steel 304 to ensure no material contamination suitable for optical and medical products.

• The drying hopper and pipe are detachable for easy disassembling and cleaning.

• Adopt pneumatic material conveying to achieve continuous conveying.

• The nitrogen concentration displayer can monitor the nitrogen concentration in real-time to ensure the unit's status. It can adjust the nitrogen concentration according to the working environment. The max nitrogen concentration is up to 99%.

■ Application

The nitrogen dryer SND-10 integrates nitrogen dehumidifying, drying, and conveying into one unit, consisting of the dehumidifier, storage hopper, and drying hopper. The unit is mainly used for drying optical-grade material for plastic injection, and filling nitrogen can prevent the injection molding materials from yellowing during the drying process. Besides, the nitrogen dew point after being filtered by the nitrogen membrane is very low.